Extra tools needed: (1)10mm Wrench (2)15mm Wrench
NOTICE: Before assembling your bike, it’s recommended to remove the battery for the reasons outlined below:
1.
2.
3.
Determine if there’s battery drain or damage during shipping.
Reduce the weight of the ebike to make it easier to maneuver the bike while assembling.
Avoid battery damage during the assembly process.
Go to page 27 to learn about removing and charging the battery.
Bike Assembly Guide
◆ Preparation Checklist
6
*Please go to our Youtube channel “Himiway Bikes” to watch our assembly tutorial videos!
Front wheel hub axle
Headlight
Pedals Hex wrench
TransformerPower cable
Owner's manual
To Next Page
Loading...
