HIOS BLF-2000 - About Device Adjustment; Bit Attachment

- 7 -
■ About device adjustment
Bit Attachment
１．Bit attachment
·
Bit attachment for BLF-2000 (Chart) -1
Push in and hold the Joint Shaft Collar into the
body of the screwdriver to insert the bit.
·
Bit attachment for BLF-5000 / BLF-7000 Series
(Chart)-2
Pull up and hold the Joint Shaft Collar from the
body of the screwdriver to insert the bit.
２．Please conrm the attached bit is locked rmly.
BLF-2000 uses the bit of HIOS H4 ( ∅ 4).
·
BLF-5000 and BLF-7000 use the bits of HIOS H5 ( ∅ 5).
* Please use HIOS genuine bits.
∅4 or ∅5
·
The bit drive of BLF-7000X and BLF-7025X is 1/4 HEX. Please purchase the commercial
products.
(Caution) Please purchase the commercial bit with the specied shape.
９.0 ｍｍ
6.35mm
(Hex bit types that cannot be used)
● Hex bits with two recesses and double bits cannot be
used with this product.
● BLF-2000
(Chart)-1 Bit attachment
● BLF-5000 / BLF-7000 Series
(Chart)-2 Bit attachment
Push in and hold the Joint
Shaft Collar into the body
of the screwdriver to insert
the bit.
Pull up and hold the joint
shaft collar from the body
of the screwdriver to in-
sert the bit.