HIOS CL-2000 - Page 4

3
α
-Series
(ESD, Q, PS-Type)
Model
α
-4500
α
-5000
α
-6500
Output Torque
Range
N.m 0.4 - 0.8 0.4 - 1.2 0.5 - 1.8
lbf.in 3.5 - 7 3.5 - 10 4.3 - 16
kgf.cm 4 - 8 4 - 12 5 - 18
Torque Switching Stepless Adjustment
Unloaded Rotation
Speed (r.p.m)
HI 1700 1000 1700
LOW 1200 700 1200
Screw Size
(mm)
Small Size Screw 2.0 - 3.0
2.0 - 3.0
3.0 - 4.0
Tapping Screw 2.0 - 2.6 2.6 - 3.0
Dimensions
(mm)
Grip Diameter
∅
32.5
∅
32.5
∅
37
Total Length 207 207 235
Bit Type Hios H4 or 1/4 Hexagonal
Hios H5 or 1/4
Hexagonal
*1
Weight (g) 440 (490) 660 (660)
Length of screw-
driver cord (see the
table of attached
cord reference)
Standard 1.5m(5p) 1.5m(5p) 2m(5p)
α
-ESD A A A
α
-Q C C D
*2
Power
Supply
CLT-45
○ ○
CLT-60
○ ○ ○
CLT-100
○ ○
MC-70L
○ ○ ○
*1
: Numeric data in ( ) is weight of push-to-start driver.
*2
: Circles (
○
) indicate that the power packs can be used with the respective tools.
Due to the high rotating speed, the tightening torque of
α
-series screwdrivers may differ
from the setting depending on the screw or board materials being used.
●
Reference of attached cord for drivers
Type Attached Cord
A 2m Cord ESD Type (5P)
B 2m Cord ESD Type (5P) & Iinclude ESD Vinyl tube
C 1.5m Cord Type (5P) & Iinclude Vinyl tube
D 2m Cord Type (5P) & Iinclude Vinyl tube
Precautions on Use
(1) Do not drop it or otherwise subject it to excessive
shock.
(2) Be careful not to splash water or oil.
(3) Use HIOS power supplies units. We are not respon-
sible for any malfunctions or troubles caused by using
power units other than specied.