What to do if my hippomed AirOne Flex unit does not switch on?
If your hippomed Pet Care Product unit does not switch on, the battery may not be charged. In this case, charge the battery. Alternatively, the switch might be faulty, requiring you to contact the service center.
Why is there no inhalation mist visible in my hippomed AirOne Flex Pet Care Product?
If no inhalation mist is visible in your hippomed Pet Care Product, consider the following possibilities: * Check the content of the nebuliser cup. * Ensure the unit is switched on (the switch LED must be green). * The oscillator may be contaminated. See Chapter 6.3. * The oscillator may be faulty, in which case, contact the service center.
How to fix horse not inhaling properly with hippomed Pet Care Product?
If your horse is not inhaling properly with the hippomed Pet Care Product, consider the following: * Check the inhalation valves for contamination. * Check the tube connection between the unit and mask. * Check the air supply setting on the mask.
What to do if hippomed AirOne Flex battery is not charging but LED is displaying on the charger?
If the hippomed Pet Care Product battery is not charging, but the LED is displaying on the charger, the charging socket might be oxidised. To resolve this, wet the plug with contact spray, plug it in and out several times, and turn it in the socket at the same time.
Why is my hippomed AirOne Flex battery not charging and there is no LED display on the charger?
If your hippomed Pet Care Product battery is not charging and there is no LED display on the charger, check the power supply to the charger.
Details on the manual's content, scope, and revision policy.
Version, creation, and last change dates of the operating instructions.
Explains the different types of safety warnings used in the manual.
Specific instructions related to safety within the operational context.
General guidelines for safe operation, maintenance, and authorized personnel.
Provides overarching safety information and explains danger warnings.
Explains the function of the ultrasound inhaler for horses.
Lists the components included with the AirOne Flex ultrasound inhaler.
Outlines the intended and correct usage of the ultrasound mist generator.
Details technical specifications, item number, power, particle size, and ambient conditions.
Steps for preparing the unit before initial use.
Guidance on how to position the unit during operation.
Instructions for preparing the nebulising chamber and adding contact fluid/medium.
Steps for preparing the horse for the inhalation treatment.
Specific instructions for stationary use of the inhaler with the horse.
Specific instructions for mobile use of the inhaler with the horse.
How to switch on the unit and adjust the fresh air supply on the mask.
Details on varying nebulisation quantity by adjusting fresh air supply.
Explains the function of different LED indicators on the control panel.
Indicates unit shutdown due to overheating of contact liquid.
Signals low contact liquid or potential sensor issues.
Guidelines for charging the battery and using the charger.
Procedures for cleaning and disinfecting the unit after each use.
Crucial details regarding the use of the specified contact fluid.
Additional advice on caring for the nebulising chamber and unit housing.
General| Nebulization Technology | Ultrasonic |
|---|---|
| Portability | Portable |
| Reflective Elements | No |
| Application | Inhalation therapy for animals |
| Power Source | Battery-operated |
| Product Type | Nebulizer |
| Color Options | Blue |
| Intended Use | Treatment of respiratory diseases in animals (horses, dogs, cats, etc.) |
To Next Page