To Next PageTo Next Page
Need help?Do you have a question about the HIRAYAMA HV-25 and is the answer not in the manual?
Explains intended research use and media liquefaction capabilities.
Highlights key features like automatic timer, multiple operation modes, and optional equipment.
Identifies and describes the external and internal components of the autoclave.
Provides guidelines on where to install the equipment to avoid hazards and ensure proper function.
Details the steps for physically setting up the autoclave and connecting the power cord.
Outlines the step-by-step process for operating the autoclave from power on to shutdown.
Explains how to adjust the exhaust rate during a specific cycle for controlled steam release.
Instructions for emptying and cleaning the exhaust bottle to maintain performance.
Procedure for draining the working chamber to prevent pipe clogging when not in use.
Steps for cleaning the interior of the working chamber and its components.
Guidance on cleaning the exterior of the autoclave body without damaging the finish.
How to replace the lid gasket to prevent steam leaks and ensure proper sealing.
Instructions for replacing the backup battery that maintains clock and settings.
Explains error codes displayed by the autoclave and their corresponding remedies.
Provides common symptoms, causes, and troubleshooting steps for minor issues.
General| Capacity | 25 liters |
|---|---|
| Type | Autoclave |
| Sterilization Time | Variable |
| Power Supply | AC 220-240V, 50/60Hz |
| Chamber Material | Stainless steel |
