HIRAYAMA HVA-110 - User Manual

HIRAYAMA AUTOCLAVE
HICLAVE
HVA-85
HVA-110
OPERATION MANUAL
WARNING:
 Be sure to read this operation manual carefully and handle it properly.
Issued on October 20, 2005. Revised on June 1, 2009
No. S04G-001-C
!

Summary

Read Carefully Before Using

Safety Symbol Definitions

Explains WARNING, CAUTION, IMPORTANT, and NOTE symbols.

Hazardous Materials

Lists substances to avoid for safe operation.

Display and Operation Switches

Displays and Controls

Chapter 2. Installation

Installation Instructions and Notes

Guidelines for location selection and important advice for installation.

Installation Procedure

Anchoring and Power Connection

Steps for securing the unit and connecting the power supply.

Exhaust Bottle Setup

Pouring Water into Bottle

Final Installation Steps

Breaker ON and Exhaust Hose Setup

Instructions for turning on the breaker and connecting the exhaust hose.

Chapter 3. Operation Method

Power On and Water Filling

Loading Substance into Chamber

Selecting Sterilization Modes

How to choose between programmed sterilization modes (1, 2, 3).

Changing Set Values

Step-by-step guide to adjusting sterilization temperature, time, and cooling patterns.

Starting Operation

Unloading Sterilized Substances

Post-Operation Procedures

Operation Cycles Breakdown

Cooling and Warming Cycles

Chapter 6. Troubleshooting

Error Detection and Alarms

Lists error codes, their causes, and recommended remedies for malfunctions.

Early Troubleshooting Guide

Addresses common issues, their causes, and simple troubleshooting steps.

HIRAYAMA HVA-110 Specifications

General

Brand	HIRAYAMA
Model	HVA-110
Category	Laboratory Equipment
Language	English