HIRED-HAND SUPER-SAVER XL SS-225-XL-120 User Manual

HIRED-HAND, INC. • 1733 County Road 68 • Bremen, AL 35033 USA• Phone 256-287-1000 • Fax 256-287-2000
Manual Part No. 4801-3031 Rev 6-09
FOR YOUR SAFETY
If you smell gas:
1. Open windows
2. Don’t touch electrical switches
3. Extinguish any open flames
4. Immediately call your gas supplier
CONSIGNES DE SECURITE
Si vous sentez une odeur de gaz:
1. Ouvrez les fenetres
2. Ne touchez pas aux interrupteurs electriques
3. Etegnex toute flamme hue
4. Contactez immediatement votre compangie
de gaz
FOR YOUR SAFETY
Do not store or use gasoline or any
flammable vapors and liquids in the
vicinity of this or any other appliance
CONSIGNES DE SECURITE
II es interdit d′utiliser des liquides
inflammables ou degageant des
vapeurs inflammables, a proximite
de tout appareil fonctionnant au gaz
Agricultural Building Heater – Direct Spark Igniter
Retain Instructions For Future Reference
MODEL BTUH kW
SS-225-XL-120 225,000 65.9
♦
Direct Spark Ignition
♦
Wash Down Design
SUPER-SAVER XL
TM
HEATER
Owner’s Manua
l

HIRED-HAND SUPER-SAVER XL SS-225-XL-120 Specifications

General

Brand	HIRED-HAND
Model	SUPER-SAVER XL SS-225-XL-120
Category	Heater
Language	English

Summary

For Your Safety

General Hazard Warnings

Specific Operational Warnings

Warnings cover combustible materials, usage restrictions, and gas pressure.

Specifications and Requirements

Warnings and Cautions

Electrical Grounding Instructions

Instructions for proper electrical grounding of the appliance for safety.

Maintenance and Warranty

Routine Maintenance Procedures

Details regular checks and cleaning for optimal heater performance and safety.

Limited Warranty Information

Warranty Conditions and Limitations

Installation Guide

Heater Mounting and Leveling

Describes chain/cable suspension, mounting, and leveling procedures.

Duct and Gas Supply Connection

Instructions for installing the dual-flare duct and connecting the gas supply.

User Instructions

Operation and Safety Procedures

Component and Wiring Diagram

Ladder Type Schematic Diagram

Servicing Instructions

Direct Spark Ignition System Servicing

1016 Direct Spark Ignition System

Status Indicator Error Conditions

Checking Manifold Pressure

Chart 1: First Visual Check

Chart 2: Second Visual Check

Chart 3: Third Visual Check