HiRO H50113 - Request ID Information

Hiro H50113
26
I<value>—Request ID Information
Use this command to display product information about the
modem. In each case the information is transmitted to
the host system followed by a final result code.
Result codes:
_ As described in Table 8 if <value> = 0—9, 11.
_ ERROR if <value> ≠0—9, 11.
I<value>—Request ID Information
Use this command to display product information about the
modem. In each case the information is transmitted to
the host system followed by a final result code.
Result codes:
_ As described in Table 8 if <value> = 0—9, 11.
_ ERROR if <value> ≠0—9, 11.
Command Function
L0
Low volume.
L1
Low volume.
L2
Medium volume (default).
L3
High volume.