Hirschmann EAGLE30 series - Disassembly; Removing the device

38
Installation EAGLE20/30
Release 06 04/2014
5 Disassembly
5.1 Removing the device

Disconnect the data cables.
 Disable the working voltage.
 Disconnect the terminal blocks.
 Disconnect the grounding.
 To remove the device from the DIN rail, press the device downwards and
pull it out from under the DIN rail.
Figure 8: Removal from the DIN rail
WARNING
ELECTRIC SHOCK
Disconnect the grounding solely after disconnecting all other cables.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.