Need help?Do you have a question about the Hirschmann MACH 4000 and is the answer not in the manual?
General| Model | MACH4000 |
|---|---|
| Operating Temperature | -40°C to +70°C |
| Managed | Yes |
| Switching Technology | Store-and-forward |
| Management | Web-based, CLI, SNMP |
| Ports | Up to 24 |
| Port Type and Speed | 10/100/1000 Mbps Ethernet, Gigabit Ethernet |
| Speed | 10/100/1000 Mbps |
| VLAN Support | Yes |
| Redundancy | HSR, PRP |
Use the CLI for detailed configuration and advanced switch management.
Configure the switch graphically via a web browser interface.
Configure IP settings using the Command Line Interface.
Automate IP parameter assignment using DHCP.
Set IP parameters through the graphical web interface.
Solutions for replacing a faulty switch with a new one.
Methods for loading configuration data into the switch.
Methods for saving current configuration data.
Manage and secure remote access protocols like Telnet, Web, and SSH.
Implement MAC or IP-based security policies on switch ports.
Secure network access using IEEE 802.1X port authentication.
Filter traffic based on IP or MAC addresses using Access Control Lists.
Control traffic rates on ports to prevent congestion.
Prioritize traffic types to ensure quality for critical applications.
Segment the network into virtual LANs for better organization.
Check the overall operational status and health of the switch.
Detect and resolve IP address conflicts on the network.
Set up SSH access using key pairs for secure remote management.
To Next Page
