Setting up configuration environment
18
A.4
Preparing access via SSH
Basic - L3P
Release
4.0
11/07
Figure 78: PuTTY key generator
The OpenSSH Suite offers experienced network administrators a further op-
tion for generating the key. To generate the key, enter the following com-
mand:
ssh-keygen(.exe) -q -t rsa1 -f rsa1.key -C '' -N ''
A.4.2 Uploading the key
The Command Line Interface enables you to upload the SSH key to the
Switch.
Store the key file on your tftp server.