Loading software updates
Basic - L3P
Release
4.0
11/07
4.1
Loading the software from the ACA
3
4.1 Loading the software from
the ACA
You can connect the ACA 21-USB to a USB port of your PC like a conven-
tional USB stick and copy the Switch software into the main directory of the
ACA 12-USB.
Connect the ACA 21-USB onto which you copied the Switch software with
the USB port of the Switch.
Open the system monitor (see page 16 "Opening the system monitor").
Select 2 and press the Enter key to copy the software from the ACA 21-
USB into the local memory of the Switch. At the end of the update, the
system monitor asks you to press any key to continue.
Select 3 to start the new software on the Switch.
The system monitor offers you additional options in connection with the soft-
ware on your Switch:
X selecting the software to be loaded
X starting the software
X performing a cold start
To Next Page
Loading...
Need help?
General
