Loading software updates
6
4.2
Loading the software from the tftp server
Basic - L3P
Release
4.0
11/07
4.2 Loading the software from
the tftp server
For a tftp update, you need a tftp server on which the software to be loaded
is stored (see on page 210 "tftp server for software updates").
The URL identifies the path to the software stored on the tftp server. The URL
is in the format tftp://IP address of the tftp server/path name/file name (e.g.
tftp://149.218.112.5/mice/mice.bin).
Select the Basics:Software dialog.
Enter the path of the Switch software.
Click on "tftp-Update" to load the software from the tftp server to the
Switch.
To Next Page
Loading...
Need help?
General
