Synchronizing the system time in the
6
7.2
SNTP
Basic - L3P
Release
4.0
11/07
7.2.3 Configuring SNTP
Select the Time:SNTP dialog.
X Configuration SNTP Client and Server
In this frame you switch the SNTP function on/off.
When it is switched off, the SNTP server does not send any
SNTP packets or respond to any SNTP requests.
The SNTP client does not send any SNTP requests or evaluate
any SNTP broadcast/Multicast packets.
X SNTP Status
The "Status message" displays conditions such as "Server can-
not be reached".
X Configuration SNTP Server
In "Destination address" you enter the IP address to which the
SNTP server on the Switch sends the SNTP packets.
IP destination
address
Send SNTP packets
periodically to
0.0.0.0 Nobody
Unicast Unicast
224.0.1.1 Multicast
255.255.255.255 Broadcast
Table 5: Periodic sending of SNTP packets
To Next Page
Loading...
Need help?
General
