Hirschmann EAGLE30 series - Accessories; SFP Transceivers

50
Installation EAGLE20/30
Release 06 04/2014
 Accessories
Note: Please note that products recommended as accessories may have
characteristics that do not fully correspond to those of the device. This
may limit their possible usage in the overall system.
Name Order number
Terminal cable 943 301-001
AutoConfiguration Adapter ACA 21-USB (EEC) 943 271-003
AutoConfiguration Adapter ACA 31 942 074-001
For device variants with operating voltage characteristic value K:
3-pin terminal block (50 pieces) for supply voltage
943 845-008
For device variants with operating voltage type C:
2-pin terminal block (50 pieces) for supply voltage
943 845-009
2-pin terminal block (50 pcs.) for signal contact and input 943 845-010
Rail Power Supply RPS 30 943 662-003
Rail Power Supply RPS 80 EEC 943 662-080
Rail Power Supply RPS 120 EEC (CC) 943 662-121
Industrial HiVision Network Management Software 943 156-xxx
Gigabit Ethernet SFP transceiver Order number
M-SFP-TX/RJ45 943 977-001
Note the following for the M-SFP-TX/RJ45 transceiver:
 Can be used with:
- HiOS from software version 03.0.00
- Classic Switch Software from software version 04.1.00
- HiSecOS ab Software-Version 01.2.00
Cannot be used with the following devices:
- SPIDER II
- MSP/MSM
- EES
 Twisted-pair ports realized through this transceiver have longer link failure detection times
compared with twisted-pair ports provided by the device directly.
 When using this SFP transceiver, assume a higher switching time for RSTP.
 Not applicable for combo ports.
M-SFP-SX/LC 943 014-001
M-SFP-SX/LC EEC 943 896-001
M-SFP-MX/LC EEC 942 108-001
M-SFP-LX/LC 943 015-001
M-SFP-LX/LC EEC 943 897-001
M-SFP-LX+/LC 942 023-001
M-SFP-LX+/ LC EEC 942 024-001
M-SFP-LH/LC 943 042-001
M-SFP-LH/LC EEC 943 898-001
M-SFP-LH+/LC 943 049-001
Bidirectional Gigabit Ethernet SFP transceiver Order number
M-SFP-BIDI Type A LX/LC EEC 943 974-001
M-SFP-BIDI Type B LX/LC EEC 943 974-002
M-SFP-BIDI Type A LH/LC EEC 943 975-001