Hirschmann OZDV 114 B - Technical Data

7
Technical data
Component OZDV 114 B
Operating voltage +5 V ±5%DC
Current consumption max. 200 mA
Electrical interface
Input signal V.11 (RS 422) level; HIGH >_ +0.6 V, LOW <_ –0.6 V
Output signal V.11 (RS 422) level; HIGH >_ +2.0 V, LOW <_ –2.0 V
Optical interfaces
Optical transmitter LED
Launchable optical power
in fibre G 62.5/125 µm >_ –14 dBm
Wavelength 860 nm
Optical receiver Opto-Schmitt trigger
Minimum optical input power <_ –25 dBm
System data
Data rate 0 to 6.5 Mbit/s
Bit error rate < 10
–9
Transmission distance with 3 dB
system reserve
with fibre G 62.5/125 µm (3.5 dB/km) typ. 0 to 2.2 km
Connections
Electrical 25-pin Sub-D connector, male
Optical BFOC socket
Electromagnetic compatibility (EMC)
Interference emissions meets EN 55022 A1, limit class B
Interference immunity meets EN 61000-6-2
ESD meets EN 61000-6-2
Burst meets EN 61000-6-2
Climatic ambient conditions
Ambient temperature 0°C to +55 °C
Storage temperature –20 °C to +70 °C
Humidity 10% to 90% (non-condensing)
Mass 150 g
Dimensions W x H x D 93 x 56.5 x 26 mm
7
21
11
1† PGND
GND
10 Rx +
9Tx –
GND
18+ 5 V DC 5%
GND
22
Tx
+
23
Rx
–