Maintenance and care
Precautions before maintenance: be sure to disconnect the power plug
Product maintenance:
Do not press the filter hard except for the dust on the surface
with a rope, in order to avoid the filter from being damaged;
Cleaning of HEPA filter/composite filter: it shall be maintained
and cared by a vacuum cleaner. Do not wash with water;
Cleaning of high-density filter: it shall be maintained and cared
by a vacuum cleaner. And, it also can be washed with tap
water or neutral detergent;
The machine body shall be wiped with a piece of dried soft
cloth. Please disconnect the power plug during wiping, in order
to avoid electric shock.
Filter
High-density filter
Hints
Do not run the machine while removing the filter:
During maintenance, do not place the removed parts randomly, in order to
avoid tripping or damage to accessories;
When the machine is left unused for a long period of time: please dis-
connect the power plug (energy will also be consumed in standby mode);
The machine shall be covered with a plastic bag and kept upright
(keeping the machine flat or upside down may cause failures).
The product shall be maintained every two weeks
Estimated filter replacement cycle
Expected interval
6-8 months
Composite filter
Test condition: 8h/day in normal environment.
Hints:
According to actual use environment and use method,
replacement cycle of filter will be different. When the operating
effect is poor, please replace the filter timely;
Please dispose the replaced filter as non-combustible
garbage;
To Next Page
Loading...
Need help?
General
