Need help?Do you have a question about the Hisense AS-09UR4SGNPQ and is the answer not in the manual?
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Indoor Noise Level | 38 dB(A) |
| Outdoor Noise Level | 52 dB(A) |
| Compressor Type | Rotary |
| Air Flow (High) | 550 m³/h |
| Type | Split |
| Heating Capacity | 9500 BTU |
Details on overload protection parameters for the air conditioner.
Technical specifications for the air conditioner unit, including capacity, airflow, and dimensions.
Detailed specifications for key components like fan motors and compressor.
Specifications for additional components such as inductors, filters, and stepper motors.
Dimensional drawings and specifications for the indoor unit.
Dimensional drawings and specifications for the outdoor unit.
Diagram illustrating the refrigerant flow in cooling and heating cycles.
Step-by-step guide for evacuating the refrigerant system.
Information on maximum piping length and additional refrigerant charge requirements.
Wiring diagrams for both indoor and outdoor units.
Details on the electrical control logic for indoor and outdoor units.
Table of parameters for the outdoor compressor temperature sensor.
Parameter table for coil and indoor/outdoor sensors.
General operating parameters like temperature, humidity, and power supply.
Details on remote controller display, control functions, and emergency switch.
How the unit communicates with the remote controller and indoor sensors.
Explanation of the timer functions (on/off) for scheduling operation.
Features and modes related to the sleep function for comfortable operation.
Description of the high-efficiency operation mode.
How the unit automatically selects operating modes based on temperature.
Details on mode switching, temperature compensation, and fan speeds in auto mode.
Operation and switching behavior of the 4-way valve.
Control methods and positions for the air flap.
Details on temperature compensation and indoor fan speed in heating mode.
Measures to prevent cold air blow during heating.
Process of residual heat dissipation after compressor shutdown.
Speed control of the outdoor fan based on ambient temperature.
State and switchover of the 4-way valve during heating operation.
Flap positions and control during heating mode.
Illustration of the dehumidifying mode operation.
Details of the air blowing mode with indoor fan operation.
How LED indicators show compressor operating status and restrictions.
Important notes regarding unit control, power interruption, and beeper functions.
Lists outdoor and indoor unit indicators for troubleshooting various alarms.
Flowchart for diagnosing and troubleshooting unit issues.
Details and troubleshooting steps for specific error codes related to sensors and protection.
Troubleshooting steps for indoor fan motor issues.
Troubleshooting steps for communication errors between units.
Procedure for checking the refrigerant system's status and pressure.
Steps for checking refrigerant system pressure in cooling and heating modes.
Examination and repair procedures for the indoor fan motor.
Examination and repair procedures for the outdoor fan motor.
Compressor specifications, examination, and repair guidance.
Specifications for the overload protection mechanism.
Common errors and checks related to inductance components.
Resistance testing procedures for the stepper motor.
Procedure for checking fuses on the PCB assembly.
Method for testing capacitor health using a multimeter.
Step-by-step instructions for disassembling the indoor unit.
Step-by-step instructions for disassembling the outdoor unit.
Detailed list of parts for the indoor unit with part numbers and quantities.
Detailed list of parts for the outdoor unit with part numbers and quantities.
To Next Page