Hisense Babysense II - User Manual

The technology of Babysense Monitors is a unique safety and reassurance system that increases
a parent’s comfort level and allows for better sleep. However no device can substitute adult
supervision and it is important that an adult be within hearing range of the Babysense monitor
at all times. Please remember that Babysense cannot prevent Sudden Infant Death or any type
of distress. The purpose of the device is to alert you when stopping or slowing of movement
occurs.
Babysense monitors sense movements and motion only. Primary responsibility for infant safety
resides with the adult caretaker, who must personally check on the infant as often as necessary.
Babysense is a movement monitor for home use, intended for use with healthy infants. It is not
intended for premature babies, babies considered to be at high-risk or babies requiring medical
supervision. Babysense is suitable for infants up to one year.
IMPORTANT INFORMATION:
CARE AND MAINTANANCE
Babysense requires no special treatment beyond replacing batteries when the battery indicator
light goes on. The sensor pads and control unit may be wiped with a damp cloth. Batteries should
be removed and the device stored in a dry shaded place when not in use.
CAUTION:
DO NOT put an additional baby or pet in the bed. Babysense cannot be used for two babies in
DO NOT operate vaporizer, ventilator or blow heater directly towards the bed.
DO NOT use Babysense in a moving vehicle (car) carriage or stroller, or with a rocking device.
DO NOT
use any moving toys/mobiles near the bed while using Babysense.
one bed.
Contents:
Monitoring control unit, hanging bracket, two sensor pads, connecting
cable.
Please read all instructions before using your Babysense,
and keep them handy for future reference.
Babysense continually detects your baby’s motion. It senses the
slightest body movements, even during relaxed sleep.
An audio alarm alerts you if no movement is detected within 20 seconds
or if the monitor detects less than 10 micro - movements per minute.
The system consists of monitoring unit connected to sensor pads
placed between the mattress and the crib base. It monitors your baby’s
every movement.
Two round unique sensor pads optimally cover the sleeping area and
feature sensitivity level adjustment intended for reducing the risk of
false alarms and delayed alarms.
Non-touch sensor pads are never in direct contact with the baby and
do not limit movement.
Completely battery operated (4 x AA) for your baby’s safety.
Main Features
This product is warranted to be free from defects in material and workmanship for a
period of (1) year from the date of purchase, except as noted below. BabySense LLC
will repair or replace this product, at our option, at no cost. This warranty does not
apply to product that has been damaged as a result of improper maintenance or other
misuse. This warranty is also void if the owner repairs or modifies the product in any
way. BabySense LLC is not liable for any incidental or consequential damage with
regard to this product. Warranty also excludes any liability other than above. No other
warranties are given.
If you have a claim under this warranty, do not return to the store.
Please contact BabySense customer service at: customerservice@babysensellc.com.
For additional information, please visit our website or call the toll free number:
website: www.babysensellc.com
toll free number: 1-877-780-3033
Distributed by:
3910 Adler Place Suite 115 Bethlehem, PA 18017 |
BabySense LLC
Manufactured by HISENSE LTD.
Limited 1 Year warranty
14

Summary

Important Information

Cautionary Notes

Important warnings regarding product usage, placement, and potential hazards.

Care and Maintenance

Instructions for maintaining the sensor pads and control unit, including battery replacement.

Limited 1 Year Warranty

Details of the product's one-year limited warranty, coverage, and claim process.

Main Features

Highlights the key functionalities and benefits of the Babysense II Infant Movement Monitor.

Installation and Operation

Installation Steps

Detailed steps for setting up the sensor pads, control unit, and connecting cables.

Newborn Installation Guidance

Specific advice on sensor pad placement for infants who are not yet crawling.

Basic Operation

Instructions on how to turn the device on and off and interpret the indicator lights.

Performance and Setup Testing

Essential steps to test the device's operation and setup for accuracy and functionality.

Environmental Malfunctions

Explanation of how environmental factors can affect the monitor's performance.

Dealing with Interference

Methods to identify and resolve surrounding interferences affecting the monitor's readings.

Troubleshooting Guide

False Alarms (Short Delay)

Troubleshooting steps for false alarms occurring shortly after activation.

Alarm Goes Off After Hours

Solutions for when the alarm activates after extended periods of no movement.

Delayed Alarms (Baby Removal)

Steps to resolve delayed alarms when removing the baby from the bed.

Alarm Fails Performance Test

Troubleshooting steps when the alarm fails the 20-second performance test.

Hisense Babysense II Specifications

General

Brand	Hisense
Model	Babysense II
Category	Security System
Language	English