Hisense Chill RC07N1CBD1

Questions and Answers

D
Dr. Helen Barrett MDAug 11, 2025
What to do if my Hisense Chill RC07N1CBD1 is not dispensing properly?
- J
  jacksondeniseAug 11, 2025
  If your Hisense Beverage Dispenser is not dispensing properly, here are a few things you can check: * Make sure the selection needs to be re-stocked. * Verify that the Child Lock is not engaged. * Ensure the delivery chute flap is closed tightly. * Confirm the delivery chute is free from blockage. * Confirm the vend rack is free from foreign objects. * Make sure that beverages are loaded correctly, and correctly oriented for proper operation.
B
Blake EdwardsAug 17, 2025
How to fix Hisense Chill RC07N1CBD1 Beverage Dispenser that is not powering on?
- M
  Michael WhiteAug 18, 2025
  If your Hisense Beverage Dispenser is not powering on: * Check whether the power cord is properly plugged into the power outlet. * Inspect the fuse or circuit of your power supply and replace it if necessary. * If the ambient temperature is too low, try setting the vend compartment temperature to a colder set point.
Z
Zachary WilliamsAug 23, 2025
Why is my Hisense Chill RC07N1CBD1 fan motor running continuously?
- L
  Lori ShawAug 23, 2025
  It is normal to frequently hear the sound of the fan motor. The fan motor will run more than normal under the following conditions: * The temperature setting is colder than necessary. * A large quantity of warm bottles or cans have been recently loaded. * The ambient temperature is too high. * The appliance’s doors have been open too long or too often. * The appliance was recently re-started after being powered off for a period of time.
B
bmcmahonAug 29, 2025
Why is the beverage temperature not cold enough in my Hisense Beverage Dispenser?
- R
  Rebecca HowardAug 29, 2025
  If the beverage temperature in your Hisense Beverage Dispenser isn’t cold enough, make sure the doors are fully closed and that the appliance has sufficient clearance at the sides, back, and top.
C
Crystal TylerSep 4, 2025
How to stop water drips on the floor from Hisense Chill RC07N1CBD1?
- B
  Brandy BarnesSep 4, 2025
  If water drips on the floor from your Hisense Beverage Dispenser, it may be due to the water pan for the compressor not properly draining or not being leveled, or the water spout is blocked. You may need to pull the appliance away from the wall to check the pan and spout.

Hisense Chill RC07N1CBD1 Specifications

General

Cooling System	Compressor
Installation	Freestanding
Color	Black
Material	Plastic
Temperature Range	5°C to 15°C

Hisense Chill RC07N1CBD1 - User Manual

Table of Contents

Questions and Answers

Hisense Chill RC07N1CBD1 Specifications