To Next PageTo Next Page
Need help?Do you have a question about the Hisense Hi-Therma AHZ-140HCDS1 and is the answer not in the manual?
General| Model | AHZ-140HCDS1 |
|---|---|
| Category | Heat Pump |
| Cooling Capacity (kW) | 14.0 |
| Heating Capacity (kW) | 16.0 |
| Refrigerant | R410A |
| Type | Air to Water |
| Power Supply | 380-415V/3Ph/50Hz |
| Operating Temperature Range (Heating) | -15 to 35 °C |
Covers crucial safety precautions for operating and servicing the unit.
Covers essential warnings, cautions, and notes for safe operation and installation.
Details the required clearance and placement for the unit to ensure proper operation and ventilation.
Warns about fire hazards from R32 leaks and proper installation practices.
Outlines requirements for anti-freezing, minimum water volume, and flow rate.
Guides the process of filling the water circuit and purging air.
Outlines initial checks for electrical components, wiring, and power supply.
Provides a comprehensive checklist to ensure proper system setup before initiating test runs.
Outlines checks and procedures to perform during the test run phase.
Describes high pressure switches that protect the compressor from over-pressure conditions.
