Hisense HYE-Q01 - Copying Name of Group (Block)

NOTE
The registrable number of letters are maximum 20 for the name of the group (block). If “ENTER” is pressed, the name is
indicated in 2 lines (10 letters/line) on the touchscreen display.
1 Select “Name Setting” from the screen of “Menu”.
2 Select one group (block) to copy.
3 Touch “Copy Name”.
4 Select the destination group (block) to paste. The mark of “ ” will be indicated in the button.Multiple selection of group (block)
is available to paste.To cancel the selection, press the selected group (block) again, the mark of “ ” will turn off.
5 Touch “Paste”. The name of the group (block) is copied. To copy the name of other groups, refer to (3).To finish, refer to (6).
6 If “Cancel” is tapped without tapping “Paste”, the selected items for copying are canceled.
7.6.2 Copying name of group (Block)
(2) (3)
(4)
(5) (6)
HYJM-S01H
216