7
Installing your new appliance
Before using the appliance for the first time,
you should be informed of the
following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement. Moving the refrigerator
sideways may damage your floor and the
rollers.
Ventilation of appliance
In order to improve efficiency
of
the cooling system and save
energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat. For
this reason, sufficient clear space should
be available around the refrigerator.
Suggest: It is advisable for there to be
50mm of space from the back to the wall,
at least 100mm from its top, at least
50mm from its side to the wall and a clear
space in front to allow the doors to open
125°. As shown in follow diagrams.
1
7
6
9
m
m
1
17 69 m
m
50mm
1
7 69 mm
50mm
50 mm
50mm
59
6
5
0
m
m
6
9
5
5
m
m
125
1
1
9
7
m
m
50
mm
50mm
595 m
6
5
0
m
m
Note:
This appliance performs well
within the
climate class from SN to T showed in the
table below. It may not work properly if
being left at a temperature above or below
the indicated range for a long period.
fvbr4"(100mm)
66.77"(1696mm)
2"(50mm)
23.4"(595mm)
27.4"(695mm)
25.6"(650mm)
25.6"(650mm)
36.9"(938mm)
47.2"(1197mm)
2"(50mm)
2"(50mm)
2"(50mm)
2"(50mm)
2"(50mm)
2"(50mm)
23.4"(595mm)
To Next Page
Loading...
Need help?
General
