in the compressor.
Adequate air circulation should be around the
appliance, lacking this leads to overheating. To
achieve sufficient ventilation, follow the instructions
relevant to installation.
Wherever possible the back of the product should not
be too close to a wall to avoid touching or catching
warm parts (compressor,condenser) to prevent the
risk of a fire, follow the instructions relevant to
installation.
The appliance must not be locate close to radiators
or cookers.
Make sure that the mains plug is accessible after the
installation of the appliance
Service
Any electrical work required to do the servicing of the
appliance should be carried out by qualified
electrician or competent person.
This product must be serviced by an authorized
Service Center, and only genuine spare parts must be
used.
1. If the appliance is Frost Free.
2. If the appliance contains freezer compartment.
10
To Next Page
Loading...
Need help?
General
