2
. With the door closed, remove the
screws on the outside of hinges. Open the
hinges away from the door.
●
With the hinge
open undo the screws holding it to the
cabinet
●
. Be careful with the hinge, use a
long shafted screwdriver if you have one.
3. Turn the hinge over and place it on the
diagonally opposite comer of the cabinet.
Screw back in place. Repeat with the other
hinge. Replace the door and re-attach the
hinges. Check that the door is aligned
horizontally and vertically and that the
door seals are secure on all sides before
finally tightening the hinge bracket screws.
4. Replace the upper hinge cover (left and
right). Replace the lower screw hole cover
for the cabinet. Replace the screw hole
cover for the door.
7
To Next Page
Loading...
Need help?
General
