Hisun HS5DUTV-2 - Page 160

CHASSIS
- 160-
54CC
IGBT M2 Low Driver Fail
IGBT driver failure
54CD
IGBT M2 High Driver Fail
IGBT driver failure
54CE
IGBT M3 Low Driver Fail
IGBT driver failure
54CF
IGBT M3 High Driver Fail
IGBT driver failure
5741
Invalid Powerframe Rating
Unable to identify hardware
5781
CANopen anon EMCY level 5
EMCY message received from non-Sevcon node
and anonymous EMCY level (0x2830,0) is set to
5.
MALFUNCTION INSPECTION
Appearance malfunction inspection
No
.
Phenomenon
Measure
1
Plastic cover damaged
1. Replace new plastic cover.
2. Check whether installation supporter deformed,
repairing or re-painting is needed before replacing new
plastic cover.
3. Re-paste decals and re-rivet warning labels.
2
Bumper damaged
1. Replace new bumper.
2. Check whether installation supporter deformed or
damaged, repairing or re-painting is needed before
replacing new bumper.
3
Frame toe-board damaged
1. Replace new frame toe-board.
2. Check whether gearbox and differential of front and
rear axle damaged or leakage.
3. Check plastic cover whether deformed or damaged,
repairing deformed or damaged plastic cover.
4
Warning labels
Replace damaged and vague warning labels
Brake system malfunction inspection
No
.
Phenomenon
Measure
1
Locked braking system
1. Check whether brake disc plates deformed.
2. Check whether hydraulic cylinder of brake clamp
locked or brake clamp assembly parts deformed.