DISASSEMBLING, SERVICE AND
ASSEMBLY THE SUPPORTING ROCKER
PARTS
1. Disassembling and Service
In the suspension, there is easy to appear the
problem with bushing, cotter pin and shock
absorber.
·If the left and right rocker rocks fiercely, check
the few aspect, whether the bushing of the
rocker is crushed, the middle rubber separate is
aging and chapped.
· check whether the cotter pin is credible, if it is
not instead the same spec cotter pin.
·The problem with the shock absorber and
maintain method, whether it can returns to the
position under the pressure and the torsional
spring is rupture. If it is rupture or nearly to
rupture, instead the shock absorber. whether it
leak oil, if so instead the same spec shock
absorber. According to the different request, if
there is a oil cup on the rocker, must check it
whether complete and refuels.
2. Install:
Mount fore L/R damper,up-and-down rocker
arm assembly onto the frame with Flange Bolt
M10×70 (8pcs), M10 nuts (8pcs), Flange Bolt
M10×70 (4pcs) and M10 Nut, self-locking (4pcs)
to ensure a torque of 40～45Nm.
CAUTION:
To Next Page
Loading...