● Charger cord, plug, and socket: Visual check for cracks, looseness and abrasion of wire
insulation. Hand check if cable plugs and sockets are loose. If the fault is found, please go
to the dealer to conduct a comprehensive inspection on the charger. Otherwise fire may
happen because of the heat or short circuit.
Performance Checking Items
1. Check if the headlights and its switch work normally.
2. Check if the turn signal and its switch work normally.
3. Check if emergency lights and its switch work normally.
4. Check if the "forward / reverse" switch works normally.
5. Check if the brake pedal or accelerator pedal could automatically return to position.
6. Check the braking performance to ensure that EV can fully stop in a short distance
under a stable
and rapid braking force.
7. Check if parking brake pedal can be reliably locked. And when the brake pedal or
accelerator pedal
is depressed, the parking brake pedal should be checked if it could be automatically
reset.
WARNING:
When the brake pedal is depressed by appropriate pressure,
EV should smoothly and continuously stop.
If the EV suddenly changes lanes or could not stop or suddenly
stops or brings about harsh braking noise, please immediately
check and adjust the brake system.
If the power of depressing the brake pedal is strong, the EV
would fiercely brake. While if the power is continuous and
moderate, the EV would finish the brake progress moderately.
8. Check if the parking brake function can meet the requirement. When the parking
brake pedal is depressed until it is locked, the EV can stop in a slope no more than
20% (11°) degree.
9. Check if the reverse buzzer works normally. The reverse buzzer will sound as a reminding
to the driver that he is doing the reverse when the Forward/Reverse handle or switch is
at the REVERSE position.
10. Check the steering wheel. If there is any looseness or play in the steering wheel, please
adjust it immediately.
To Next Page
Loading...