4. 维修/维护后，在电池端子上图“蓄电池端子导电膏”After the maintenance,to paste
the “conductive paste on battery”。
TROVBLESHOOTING
Diagnose electrical and mechanical problems by following an orderly procedure
and remembering the basic operating requirements
By following a systematic approach, the possibility of unnecessary parts
replacement can be avoid, always start with the simple and most obvious checks when
troubleshooting, This would include the Fuse, 故障码 and 各个开关, fuel vale position
and spark plug cap tightness
Proper maintenance as described in Chapter Three reduces the necessity for
troubleshooting. Even with the best of care, however, the EV may develop problems
that require trouble shooting.
To Next Page
Loading...