To Next PageTo Next Page
Need help?Do you have a question about the Hitachi Koki DH 26PC and is the answer not in the manual?
General| Power Input | 800 W |
|---|---|
| Drilling Capacity in Concrete | 26 mm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 30 mm |
| Tool Holder | SDS-plus |
| No Load Speed | 0 - 1, 100 /min |
Understand symbols for safe operation.
Follow all warnings regarding electrical shock, fire, and injury.
Maintain a clean, well-lit area and avoid hazardous atmospheres.
Ensure safe electrical connections and grounding.
Stay alert, use PPE, prevent unintentional starts, and maintain balance.
Use tool correctly, maintain it, and store it safely.
Ensure repairs are done by qualified personnel with genuine parts.
Wear ear protectors to prevent hearing loss from noise.
Use auxiliary handles for improved tool control.
Grip insulated surfaces and check for hidden wiring.
Avoid touching hot bits and be aware of operating conditions.
Wear dust mask and avoid inhaling dust.
Accessories for combined rotation and hammering.
Accessories for hammering-only functions.
Accessories for rotation-only functions.
Ensure correct power source and switch position before use.
Mount bits securely and install dust collection.
Choose correct bits and confirm rotation direction.
Control speed with trigger; use stopper for continuous run.
Engage mode and apply light pressure for drilling.
Attach core bit to shank and then to the rotary hammer.
Bore holes, remove center pin, and use proper technique.
Apply low viscosity grease; replace when changing carbon brushes.
Replace or resharpen dull bits for efficiency.
Tighten screws, protect motor winding from damage.
Service carbon brushes and replace damaged cords by authorized center.
Guarantees Hitachi Power Tools as per country-specific regulations.
Provides measured values for sound power, sound pressure, and vibration levels.
