To Next PageTo Next Page
Need help?Do you have a question about the Hitachi ATW-RTU-07 and is the answer not in the manual?
General| Brand | Hitachi |
|---|---|
| Model | ATW-RTU-07 |
| Category | Thermostat |
| Language | English |
Summarizes critical safety information regarding electrical hazards, proper usage, and installation precautions.
Lists all components included in the product package, such as the thermostat, receiver, and manuals.
Provides essential guidance on RF technology considerations, signal strength, and building structure impact.
Details the step-by-step process for mounting and wiring the RF receiver unit.
Presents the physical dimensions and mounting specifications for the RF receiver unit.
Identifies and explains the key components and connection points of the RF receiver.
Lists the technical specifications, including voltage, power consumption, dimensions, and weight.
Details RF transmission parameters, communication protocols, and system limitations.
Explains the DIP switch settings for configuring the device's functionality.
Provides guidelines for selecting an optimal location for the room thermostat.
Details the operation of the RF receiver, including status LED indicators and reset procedures.
Explains thermostat icons, temperature setting, night reduction, installation menu, and ON/OFF switch.
Describes how to adjust the desired room temperature using the thermostat dial.
Recommends setting a lower temperature at night or during absence to save energy.
Covers setting maximum and minimum temperature limits via the installation menu.
Explains how to turn the system ON and OFF using the thermostat dial.
Provides instructions on how to replace the batteries in the thermostat unit.
Details the steps required to link the wireless thermostat and RF receiver for communication.
Explains how to reset the thermostat to its default factory settings.
Describes the RF receiver LED behavior indicating communication issues.
Addresses issues where the receiver does not respond to setpoint changes from the thermostat.
Guides on diagnosing problems when the RF receiver's LED indicates an alarm.
