25
● Be careful of the hot water!
● Allow detergent solution to cool down.
● Unplug the machine to avoid electrical shock before this operation.
● Drain pump filter can filter the yarns and small foreign matters from the washing.
● Clean the filter periodically to ensure the normal operation of washing machine.
Open the filter by turning
to the counter clockwise
Remove extraneous matter
Close the lower cover cap
● Make sure that valve cap and emergency drain hose are reinstalled properly,
cap plates should be inserted aligning to hole plates otherwise water may leak.
● Some machines don’t have emergency drain hose, so step 2 and step 3 can
be skipped. Rotate lower cover cap directly to make water run into basin.
● When the appliance is in use and depending on the programme selected there
can be hot water in the pump. Never remove the pump cover during a wash
cycle, always wait until the appliance has finished the cycle, and is empty.
When replacing the cover, ensure it is securely re-tightened.
Open the lower cover cap
Select the Spin programme and start to drain
remaining water in the drum.
Make sure to drain the water first with Drain
programme, otherwise a lot of hot water may
come out.
●
●
● Do not open the drain filter when a programme is running.
● Do not operate the washing machine without the drain filter.
WARNING
！
CAUTION
！
Maintenances
Cleaning and Care
6
Cleaning The Drain Filter
1
3 4 5
2
To Next Page
