20
1. Remove the detergent dispenser.
Push the dent
Pull the detergent dispenser while pushing the dent.
2. Remove dirt or detergent remaining in the detergent dispenser casing
with a brush.
Detergent dispenser casing
3. Wash the detergent dispenser with water. Use a brush for narrow parts
or parts from which it is diffi cult to remove dirt.
■
How to remove and set the softener cap.
Pull up to remove Push down fi rmly to set
1. Turn off the tap.
2. Remove the water supply hose from the rear panel of the washing
machine.
3. Remove the water inlet fi lter and clean with a brush.
Water inlet fi lter
Pull out to
remove
4. Return the water inlet fi lter and the water supply hose to their original
positions.
■
External cleaning
Clean the surface of the washing machine with a soft cloth. Do not use
solvents such as alcohol or benzine.
■
Descaling
The water in some areas is hard and contains lime, so it is
recommended to use a water softening agent periodically, or use a
descaler according to the descaler manufacturer' instructions. Do this
separately from any laundry washing.
■
After each wash
Leave the door open for a while to dry the drum. This helps to prevent
the growth of mold and stagnant smells forming inside the washing
machine.
■
Maintenance wash
It is recommended to run the Tub Clean program regularly. Using this
program keeps the drum clean and prevents the growth of mold.
Care and Maintenance
Cleaning the
detergent
dispenser
Maintenance
of the washing
machine
Cleaning the
water inlet fi lter
To Next Page
Loading...
