-5-
• Removal of the handle cover
• Removal of the base
[63]
[26]
[24]
[44]
[55]
[40]
[53]
[52]
[51]
[49]
[48]
[50]
[45]
[54]
[46]
[67]
[38]
[42]
[43]
[24]
7. Removal of the base
Extract the Roll Pin D6 x 50 [63] and remove the Base [67] from the Gear Cover [26].
8. Removal of the handle cover
(1) Loosen and remove the six Tapping Screws D4 x 20 [24].
(2) Remove the Grip Cover [55] and Handle Cover [54].
(3) Remove the Switch [45], Cord [53], etc.
To Next Page
Loading...
