To Next PageTo Next Page
Need help?Do you have a question about the Hitachi C 8FSHE and is the answer not in the manual?
General| Input power | 1050 W |
|---|---|
| Power source | AC |
| Blade bore | 30 mm |
| Blade diameter | 216 mm |
| Idle speed (max) | 5500 RPM |
Weight and Dimensions| Depth | 790 mm |
|---|---|
| Width | 555 mm |
| Height | 485 mm |
| Weight | 15000 g |
Maintain a clean, well-lit area and dress properly for safety.
Always wear eye protection and use dust extraction.
Check for damage, use authorized parts, and follow repair guidelines.
Follow specific safety rules for using the miter saw.
Ensure the work area is level and free of debris with adequate lighting.
Use tool only for intended purposes; authorize repairs.
Do not touch moving parts without disconnecting power.
Use specified power; clean parts with water, not solvents.
Use genuine parts; never cut ferrous metals or masonry.
Use correct blades and ensure guards are in place and functional.
Follow safe procedures for cutting, including stopping and handling kickback.
Understand symbols for safety, manual reference, and disposal.
Details maximum cutting dimensions and saw blade specifications.
Lists power, dimensions, speed, and laser marker details.
Verify power source, switch, and use extension cords correctly.
Instructions for setting up, adjusting, and using the vise assembly.
Adjust blade limit, check guard operation, and position table inserts.
Perform cuts using ink lines, laser, and proper alignments.
How to adjust the laser line for precise cutting.
Step-by-step guides for bevel and compound cutting.
Guidance for cutting long materials and installing holders.
Procedures for groove cutting, light use, and dust extraction.
Step-by-step instructions for mounting the saw blade.
Step-by-step instructions for removing the saw blade.
Inspect blades, screws, carbon brushes, and motor.
Check lower guard operation and select accessories.
Lists the available optional accessories for the machine.
Reminder to wear hearing protection due to noise levels.
Caution about voltage fluctuations and restart prevention.
