Hitachi C 8FB2 - User Manual

Model Slide Compound Saw
Modèle Scie a coupe d’onglet radiale
Modelo Tronzadora radial abatible
C 8FB2
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
WARNING
Improper and unsafe use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual before operating the power tool. Please keep this manual
available for others before they use the power tool.
MODE D’EMPLOI ET INSTRUCTIONS DE SECURITE
AVERTISSEMENT
Une utilisation incorrecte et dangereuse de cet outil motorisé peut entraîner la mort
ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de
ce produit. Prière de lire et d’assimiler ce mode d’emploi avant d’utiliser l’outil
motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs avant
qu’ils utilisent l’outil motorisé.
MANUAL DE INSTRUCCIONES E INSTRUCCIONES DE SEGURIDAD
ADVERTENCIA
¡La utilización inapropiada e insegura de esta herramienta eléctrica puede resultar
en lesiones serias o en la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual antes de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de que utilicen la herramienta eléctrica.
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE

Hitachi C 8FB2 Specifications

General

Brand	Hitachi
Model	C 8FB2
Category	Saw
Language	English

Summary

Safety Instructions

Signal Word Meanings

Defines warning symbols used in the manual.

General Power Tool Safety

Outlines fundamental safety rules for all power tools.

Specific Power Tool Safety Rules

Details critical safety precautions for this specific tool.

Safety Dos and Donts

Lists essential actions to ensure safe operation.

Replacement Parts

Extension Cord Usage

Double Insulation Safety

Operation and Maintenance

Name of Parts Identification

Identifies and labels all major components of the saw.

Specifications

Accessories

Standard Accessories

Lists and illustrates the accessories included with the tool.

Optional Accessories

Lists additional accessories available for separate purchase.

Applications

Preparation and Pre-Use Checks

Installation and Component Setup

Steps for securely installing the saw and attaching main components.

Locking Pin Release and Adjustment

Instructions for releasing the saw's locking pin for operation.

Pre-Use Safety and Operational Checks

Essential checks before operating the tool to ensure safety and function.

Before Cutting Procedures

Groove Cutting on Guard

Procedure for cutting a groove on the saw's guard for proper fit.

Table Insert and Angle Adjustments

Adjusting the table insert and setting bevel angles for precise cuts.

Saw Blade Lower Limit Check

Verifying the saw blade's minimum cutting depth setting.

Securing the Workpiece

Methods for safely clamping the material to prevent movement.

Installing Optional Accessories (Holders, Stopper)

Guides for attaching optional holders and stoppers for stability.

Using an Ink Line for Cutting

Method for aligning cuts using the tool's pre-marked ink line.

Practical Applications and Safety Notes

Switch Operation and Safety Lock

Using Vise Assembly

Using Slide Fences

Cutting Operation Procedures

Cutting Narrow Workpieces (Press Cutting)

Technique for cutting narrower workpieces using a press motion.

Cutting Wide Workpieces (Slide Cutting)

Method for cutting wider workpieces using the slide function.

Bevel Cutting Procedures

Miter Cutting Procedures

Compound Cutting Procedures

Crown Molding Cutting Procedures

Groove Cutting Procedures

Cutting Easily-Deformed Materials

Dust Bag Usage

Saw Blade Mounting and Dismounting

Mounting the Saw Blade

Detailed steps for securely installing a new saw blade.

Dismounting the Saw Blade

Procedure for safely removing the saw blade.

Maintenance and Inspection

Saw Blade Inspection

How to check the saw blade for wear or damage.

Adjusting Loose Slide Pipe

Procedure to tighten the slide pipe if it becomes loose.

Carbon Brush Inspection

Checking and replacing worn carbon brushes in the motor.

Mounting Screw Inspection

Regularly checking all screws for tightness.

Safety Cover Operation Check

Ensuring safety covers function correctly before each use.

Storage and Handling

Proper procedures for storing and transporting the tool.

Lubrication Points

Identifying areas that require regular lubrication.

Cleaning Procedures

Service and Repairs