To Next PageTo Next Page
Need help?Do you have a question about the Hitachi C 10FSH and is the answer not in the manual?
Essential safety precautions, warnings, and definitions of signal words for safe operation.
Comprehensive safety rules for operating power tools, covering usage, environment, and specific tool procedures.
Identification and labeling of the major components of the power tool.
Technical details and specifications of the power tool, including dimensions, power, and capabilities.
List and description of standard and optional accessories available for the power tool.
Steps for installing the power tool securely and preparing it for initial use.
Procedure for disengaging the shipping lock for safe operation and storage.
Instructions for installing standard and optional accessories like dust bags and vises.
Essential checks to perform before operating the power tool, including power, blade, and guards.
How to position the table insert for various cutting angles for optimal results.
Verifying the saw blade's lower limit position to prevent damage or improper cuts.
Procedures for setting oblique angles, bevels, and miters for precise cuts.
Methods for clamping workpieces and installing holders/stoppers for stability and precision.
Instructions for adjusting the laser line position for accurate cutting guidance.
How to operate the trigger switch and lock-off button for safe tool activation.
Instructions for mounting and using the vise assembly for securing workpieces.
Step-by-step guide for performing general cutting operations with the saw.
Techniques for cutting narrow workpieces using the press cutting method.
Methods for cutting large workpieces and performing slide cutting operations safely.
Step-by-step guide for performing bevel cuts with the slide compound miter saw.
Step-by-step guide for performing miter cuts with the slide compound miter saw.
Instructions for performing compound cuts, combining miter and bevel angles.
Detailed procedures for cutting various types of crown molding accurately.
Instructions for cutting grooves into workpieces to a specified depth.
Techniques for cutting materials like aluminum sash without deformation or overload.
How to properly attach, use, and empty the dust bag for dust collection.
Step-by-step instructions for safely installing a saw blade onto the tool.
Step-by-step instructions for safely removing a saw blade from the tool.
Procedures for checking the saw blade for wear, damage, or dullness.
How to adjust for looseness in the slide pipe for smooth operation.
Checking and replacing carbon brushes for motor maintenance.
Guidelines for handling and maintaining the tool's motor, including cleaning.
Regularly checking all screws for looseness to ensure tool integrity.
Verifying the proper condition and smooth operation of the lower guard.
Guidelines for safely storing the tool when not in use.
Instructions for replacing the Poly-V-belt that transmits motor power.
Recommended points and frequency for lubricating sliding surfaces.
Procedures for cleaning chips, dust, and debris from the tool.
Information on authorized service centers and the importance of using genuine parts.
General
