To Next PageTo Next Page
Need help?Do you have a question about the Hitachi C 10FCB and is the answer not in the manual?
General| Type | Compound Miter Saw |
|---|---|
| Blade Diameter | 10 inches |
| Arbor Size | 5/8 inches |
| Motor Power | 15 amps |
| No Load Speed | 5000 RPM |
| Voltage | 120 V |
| Bevel Angle Range | 0° - 45° |
| Miter Angle Range | 0° - 52° |
Defines the meaning of signal words like WARNING and CAUTION used in the manual.
Essential safety guidelines for operating any power tool, covering general precautions.
Detailed safety rules specific to the operation of this particular power tool.
Lists prohibited actions to ensure safe usage of the power tool.
Identifies and labels the main components of the compound saw with diagrams.
Instructions on how to securely mount the power tool onto a workbench.
Procedure for disengaging the locking pin used for shipping.
Guidance on attaching optional accessories like dust bag, holder, and vises.
Steps for performing a trial run to ensure the tool operates correctly before cutting.
How to check the saw blade for stability and deflection before cutting.
Procedure to verify the saw blade's lowest cutting position relative to the table.
Instructions on correctly positioning the sub fence for various cutting operations.
Details on adjusting the oblique angle for bevel cuts on the saw.
Emphasizes the importance of firmly clamping the workpiece for safety.
Guide for installing optional holders to support longer workpieces.
How to use the optional stopper for continuous precision cutting.
Explains the function and use of the trigger switch and its lock-off button.
Steps for mounting and using the standard vise assembly to secure workpieces.
Detailed procedure for performing cutting operations with the compound saw.
Instructions for setting up and performing miter cuts on the saw.
Instructions for setting up and performing bevel cuts on the saw.
Guidance on performing cuts that combine miter and bevel angles.
Specific steps for cutting common crown molding profiles.
Tips for cutting materials like aluminum sash that may deform easily.
Instructions for attaching and emptying the dust bag for dust collection.
Step-by-step guide for safely installing a new saw blade.
Step-by-step guide for safely removing the existing saw blade.
Guidelines for checking the condition and replacing the saw blade.
Procedures for inspecting carbon brushes, mounting screws, and safety cover operation.
Instructions for proper tool storage, lubrication, and cleaning.
