Hitachi C 10FSB

TECHNICAL DATA
AND
SERVICE MANUAL
SLIDE COMPOUND SAW
C 10FSH
C 10FSB
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
LIST Nos. C 10FSH: E934
C 10FSB: E933
Revised Feb. 2004
C
MODELS
C 10FSH
C 10FSB
Hitachi 
Power Tools

Hitachi C 10FSB Specifications

General

Voltage	120V
Type	Miter Saw
Blade Diameter	10 inches
Max Cutting Capacity (Horizontal)	12 inches
Bevel Angle Range	0° - 45°
Arbor Size	5/8 inches
No Load Speed	5000 RPM
Max cutting depth at 90°	85 mm
Max cutting depth at 45°	60 mm

Summary

PRECAUTIONS IN DISASSEMBLY AND REASSEMBLY

Precautions in Disassembly and Reassembly of the Laser Marker (Only Model C 10 FSH)

Safety guidelines for disassembling and reassembling the laser marker.

Disassembly

Procedures and necessary tools for disassembling the saw components.

SELLING POINTS

Selling Point Descriptions

SPECIFICATIONS

PRECAUTIONS IN SALES PROMOTION

Warning Labels and Caution Labels

Explains the safety labels on the machine and their meanings.

Laser Marker (Only Model C 10 FSH)

Precautions Concerning Brake (For USACAN)

ADJUSTMENT AND OPERATIONAL PRECAUTIONS

Confirmation of Saw Blade Lower Limit Position

Position Adjustment of Laser Line (Only Model C 10 FSH)

Procedure for aligning the laser line with the cutting mark.

Cutting Operation

Step-by-step guide for various cutting methods.

ADJUSTMENT OF COMPONENTS

Bevel Angle Adjustment

Looseness Adjustment of the Slide Section

Steps to reduce play in the sliding mechanism.

REPAIR GUIDE