Hitachi C 10FSB

*
ALTERNATIVE PARTS
--- 1 0 --- 2 -- 04
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
C 10FSH
601 321-434 CROWN MOLDING VISE ASS’Y 1 INCLUD. 602, 618
602 321-388 VISE (B) ASS’Y 1 INCLUD. 603-608
603 321-551 KNOB BOLT M10X54 1
604 998-836 KNOB BOLT M6X11 1
605 SCREW HOLDER (B) 1
606 306-985 WASHER (H) 1
607 964-851 BASE RUBBER 1
608 304-043
MACHINE SCREW (W/WASHERS) M4X10 (BLACK) 1
* 609 960-017 KNOB BOLT M6X32 1 FOR USA, CAN, AUS, NZL
* 610 987-860
SEAL LOCK HEX. SOCKET SET SCREW M6X6 2 FOR USA, CAN, AUS, NZL
* 611 321-552 PIN 2 FOR USA, CAN, AUS, NZL
612 WARNING LABEL (L) FOR USA, CAN, AUS, NZL 1
* 613 321-387 SUB FENCE (A) ASS’Y1
INCLUD. 609-612 FOR USA, CAN, AUS, NZL
614 960-017 KNOB BOLT M6X32 1
615 301-806 WING BOLT M6X15 1
616 CROWN MOLDING STOPPER (L) 1
617 321-390 CROWN MOLDING STOPPER HOLDER 1
618 321-374 CROWN MOLDING STOPPER (L) ASS’Y 1 INCLUD. 614-617
619 974-561 STOPPER 1
620 949-404 WING BOLT M6X20 (10 PCS.) 1
621 321-390 CROWN MOLDING STOPPER HOLDER 1
622 CROWN MOLDING STOPPER (R) 1
623 301-806 WING BOLT M6X15 1
624 321-373 CROWN MOLDING STOPPER (R) ASS’Y 1 INCLUD. 614, 621-623
625 321-549 HOLDER 2
626 949-313 WING NUT M6 (10 PCS.) 2
627 949-556 NUT M6 (10 PCS.) 2
628 967-329 WASHER (H) 4
629 996-261 VISE PLATE 2
630 996-283 HIGH TENSION BOLT M6X65 2
631 321-553 GUIDE ASS'Y 1 INCLUD. 614, 619, 620, 625-630
* 632 322-444 TCT SAW BLADE 255MM-D30 HOLE-NT72 1
* 632 307-713
TCT SAW BLADE 255MM-D25.4 HOLE-NT72 1 FOR AUS, NZL
501 940-543 BOX WRENCH 10MM 1
502 998-845 DUST BAG 1
* 503 974-663Z COLLAR (A) FOR D30 HOLE 1 FOR AUS
Printed in Japan
(040213N)