What to do if my Hitachi CG23EA(SL) Trimmer engine will not start?
If your Hitachi Trimmer engine won't start, first, ensure the STOP switch is in the 'on' position. Next, check the fuel tank and refill if empty. If the tank isn't empty, press the primer bulb until you see fuel flowing through the fuel return line. Lastly, if the engine is flooded, use the warm engine starting procedure.
Why does my Hitachi CG23EA(SL) engine lack power or stall when cutting?
If your Hitachi Trimmer engine lacks power or stalls while cutting, make sure the throttle wire is tightened. Also, check the air filter and clean or replace it if it's dirty.
General safety precautions and warning system explanation.
Guidelines for the operator's personal safety during use.
Specific safety rules for operating the trimmer/brushcutter.
Precautions related to handling and storing fuel.
Rules for safe operation of the trimmer/brushcutter.
Step-by-step instructions for assembling the equipment.
Pre-operation checks and procedures.
Instructions for correctly mixing fuel and oil.
Procedures for starting and stopping the engine.
How to adjust the engine's idle speed.
To Next Page
General
