Hitachi CM 4SB2 User Manual

CM 4SB2
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce
produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil
motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs et
propriétaires avant qu’ils utilisent l’outil motorisé.
Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica.
Este manual debe ser guardado en un lugar seguro.
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool.
This manual should be stored in safe place.
Model Cutter
Modèle Scie à diamant
Modelo Cortadora

Hitachi CM 4SB2 Specifications

General

Type	Cutter
Model	CM 4SB2
Manufacturer	Hitachi
Blade Diameter	110 mm
Max Cutting Depth	34 mm
Power Input	1320 W
No Load Speed	11, 500 RPM

Summary

Safety Information

Important Safety Information

Read and understand all safety precautions before operating the power tool.

Meanings of Signal Words

Explains the meaning of signal words like WARNING, CAUTION, and NOTE.

Safety Rules and Instructions

General Safety Rules

Outlines fundamental safety rules for operating power tools.

Specific Safety Rules and Symbols

Details specific safety rules and visual symbols to be aware of during operation.

Further Safety Instructions for All Saws

Provides additional safety guidelines specific to saws, including kickback prevention.

Double Insulation for Safer Operation

Functional Description

Name of Parts

Identifies and labels the different parts of the power tool with a diagram.

Specifications

Lists the technical specifications of the power tool.

Assembly and Operation

Applications

Outlines the types of cutting and scribing tasks the tool is designed for.

Prior to Operation

Lists essential checks and preparations required before operating the power tool.

Mounting and Dismounting the Diamond Wheel

Provides detailed instructions on how to mount and dismount the diamond wheel.

Cutting Procedures

Explains the correct steps and precautions for performing cutting operations.

Maintenance and Inspection

Inspect Diamond Wheel and Screws

Details inspecting the diamond wheel for wear and tightening screws.

Motor and Brush Maintenance

Guidance on maintaining the motor and inspecting/replacing carbon brushes.

Service and Repairs

Information on where and how to get the power tool serviced or repaired.

Accessories

Standard Accessories

Lists the accessories included with the power tool, with part codes.

Optional Accessories

Lists optional accessories that can be purchased separately.

Parts List