To Next PageTo Next PageWhat to do if my Hitachi CP-EX301N Projector shows no input signal?
If your Hitachi Projector displays 'no input signal,' confirm the signal input connection and check the status of the signal source.
What to do if my Hitachi Projector receives an improper signal?
If your Hitachi Projector is receiving an improper signal, confirm the specifications for your projector or the signal source specifications.
What to do if COMPUTER IN2/MONITOR OUT port is selected as the picture input source even if MONITOR OUT is selected for COMPUTER IN2 on Hitachi CP-EX301N?
To project the picture input to the COMPUTER IN2/MONITOR OUT port, select AUTO or SYNC ON/OFF in the dialog. If you do this, you cannot use the 021,725 287 function. Otherwise, select another port for picture input.
Identifies buttons and components of the remote control.
Guides on connecting external devices to the projector.
Instructions for connecting the projector to a power source.
Steps to insert batteries into the remote control.
Step-by-step guide to powering on the projector.
Instructions for powering down the projector safely.
How to change the audio volume and mute the sound.
How to choose and find active input sources.
Adjusts the screen's aspect ratio for different content.
Adjusts projector height, screen size, and picture sharpness.
Automatically optimizes picture position and sync.
Manually adjusts the picture's horizontal and vertical position.
Corrects trapezoidal distortion caused by projector angle.
Explains how to navigate and use the projector's menus.
Adjusts screen aspect ratio and corrects keystone distortion.
Selects preset picture modes for different sources.
Adjusts image brightness, contrast, and tonal response.
Adjusts the screen's aspect ratio for different content.
Controls overscan and adjusts vertical/horizontal picture position.
Sets the display resolution for computer inputs.
Step-by-step guide for replacing the projector lamp.
Instructions for cleaning and replacing the air filter.
General