Hitachi CP-WX5505 User Manual (English)

Other manuals for Hitachi CP-WX5505

Questions and Answers:

V
Valerie CardenasAug 19, 2025
How to fix Hitachi CP-WX5505 Projector not communicating with wireless network?
- J
  Jessica TuckerAug 19, 2025
  If your Hitachi Projector cannot communicate via a wireless network, here are some things to try: * Ensure the projector is turned on. * Verify the network device is also on. * If the standby mode is set to 'Saving', the network function might be unavailable; switch it to 'Normal'. * Check the network settings in the NETWORK INFORMATION – WIRELESS menu, consulting your network administrator if needed. * Ensure the USB wireless adapter is properly inserted. Note that only the USB-WL-11N adapter is compatible.
R
Rebecca BarnesAug 21, 2025
How to fix Hitachi CP-WX5505 Projector not communicating with wired network?
- L
  Lindsay HahnAug 21, 2025
  If your Hitachi Projector cannot communicate via a wired network, try the following: * Ensure the projector is turned on. * Verify the network device is also on. * If the standby mode is set to 'Saving', the network function might be unavailable; switch it to 'Normal'. * Make sure the LAN cable is properly connected. * Check the network settings in the NETWORK INFORMATION – WIRED menu, consulting your network administrator if needed. * Ensure that wired and wireless LANs use different network addresses. * Enable the wired network adapter in your computer's settings.
H
Hayley KochAug 25, 2025
What to do if Hitachi Projector schedule is not executed correctly?
- K
  kathleen45Aug 25, 2025
  If the schedule on your Hitachi Projector is not running correctly: * Make sure the projector is turned on. * If the standby mode is set to 'Saving', the schedule function won't work; set it to 'Normal'. * Check the Date and Time settings. * Ensure that My Image, Messenger and Blank events are programmed to occur when the lamp is lit.
W
watsonpatriciaAug 26, 2025
Why can't I use wireless and wired LAN at the same time on my Hitachi Projector?
- B
  bsmithAug 26, 2025
  You cannot use wireless and wired LAN at the same time because the same network address cannot be used for both. To resolve this, set different network addresses for wireless LAN and wired LAN. Alternatively, you can set the default gateway of either wired LAN or wireless LAN to 0.0.0.0, allowing either wired LAN or wireless LAN to access different networks.
S
Shannon WilliamsAug 27, 2025
Why is the time on my Hitachi Projector not correct?
- M
  Michael Jones MDAug 27, 2025
  If the time settings on your Hitachi Projector are incorrect: * Make sure the battery is properly set, and replace it if it's exhausted. * Check the Date/Time Settings menu of the Projector Web Control or the DATE AND TIME menu of the projector. * Connect to the network. * Check the settings of the SNTP server, consulting with your network administrator if necessary. * Set the time difference if getting the time via the network.
J
Jeremy JonesAug 29, 2025
What to do if Hitachi Projector Web Control is not displayed correctly?
- C
  Clifford HurstAug 29, 2025
  If the Projector Web Control is not displaying correctly: * Enter the IP address of the projector in your web browser. * Enable JavaScript®. The method to enable it varies depending on the web browser. * Ensure you are using a recommended web browser such as Internet Explorer® 9/10/11. * Clear your browser's cache.
M
Matthew WalkerAug 31, 2025
What to do if Hitachi CP-WX5505 cannot communicate with wireless network after connecting many devices?
- R
  Renee DavisAug 31, 2025
  If your Hitachi Projector cannot communicate via a wireless network: * Confirm the number of devices connected to the projector. Up to 11 devices can be connected in Simple Access Point mode. * If the projector is connected to the maximum number of devices, disconnect a currently connected device before connecting a new one. * Enable the DHCP setting of the computer. * Try changing the channel setting. * If the IP address overlaps, turn off your WiFi device and turn it on again. * Set WIRELESS NETWORK to ON.
D
Derek BushSep 2, 2025
Why is Crestron e-Control® not displayed on my Hitachi CP-WX5505?
- D
  Darrell HughesSep 2, 2025
  If Crestron e-Control® is not displayed: * Ensure Adobe® Flash® Player is installed. * Use a web browser that supports Adobe® Flash® Player. * Enable Crestron e-Control® settings on the Network Settings – Other Setup screen of the Projector Web Control. * Set Crestron in Projector Web Control - Network Settings - Common Setup to ON.
J
John AlvarezSep 4, 2025
What to do if Hitachi CP-WX5505 Projector cannot send an e-mail correctly?
- W
  wallacejustinSep 4, 2025
  If your Hitachi Projector cannot send emails correctly: * Check if a test email is sent correctly by pressing the [Send Test Mail] button on the Mail Settings screen of the Projector Web Control. * Verify the settings on the Mail Settings screen of the Projector Web Control. * Ensure a valid email address is set. * Confirm if the specific Error/Warning is set to be sent on the Mail Settings screen of the Projector Web Control.
G
Gabriela WelchSep 6, 2025
What to do if Hitachi CP-WX5505 Projector cannot control the external device by using Network Bridge?
- P
  pdixonSep 6, 2025
  If you cannot control an external device using Network Bridge: * Check the settings in OPTION – SERVICE – COMMUNICATION – COMMUNICATION TYPE menu. * Ensure STANDBY MODE is set to NORMAL, and set NETWORK BRIDGE (WIRELESS/WIRED) in the COMMUNICATION TYPE menu, as Network Bridge is unavailable in SAVING mode. * Check the serial settings of both the projector and the external device.

Hitachi CP-WX5505 Specifications

General

Native aspect ratio	16:10
Projection technology	3LCD
Contrast ratio (typical)	5000:1
Screen size compatibility	30 - 300 \
Projector native resolution	WXGA (1280x800)
Focus	Manual
Zoom capability	Yes
Vertical lens shift range	0 - 50 %
Horizontal lens shift range	-5 - 5 %
Lamp power	300 W
Light source type	Lamp
Service life of light source	4500 h
Service life of light source (economic mode)	6000 h
Full HD	No
Analog signal format system	-
HDMI connector type	Full-size
HDMI ports quantity	3
Serial interface type	RS-232
USB 2.0 ports quantity	1
S-Video inputs quantity	0
Remote control type	IR
Power source	AC
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
RMS rated power	16 W

Weight and Dimensions

Depth	332.74 mm
Width	459.74 mm
Height	137.16 mm
Weight	6350 g

Summary

Projector Part Names

Projector Components Identification

Identification of the physical components and connectors of the projector unit.

Control Panel Identification

Control Panel Components

Identification of the projector's control panel buttons and indicators.

Projector Input/Output Ports

Port Identification

Description of the various input/output ports available on the projector.

Remote Control Identification

Remote Control Components

Identification and function of the buttons on the projector's remote control.

Projector Installation and Setup

Arrangement Safety Warnings

Arrangement Safety Precautions

Important safety warnings regarding projector installation and placement to avoid hazards.

Arrangement Environmental Advice

Arrangement Environmental Considerations

Advice on placing the projector in cool, well-ventilated areas, away from smoke, dust, and humidity.

Connecting External Devices

Device Connection Diagrams

Connection Diagrams

Visual diagrams illustrating how to connect computers and smart devices to the projector.

Network and Wireless Connections

Network and External Device Connections

Diagrams showing network connections via wireless adapters and external device interfaces.

Wireless Adapter and Network Safety Precautions

Wireless Adapter and Network Safety

Safety precautions for using USB wireless adapters and connecting to LAN networks.

AV Source Connections

AV Device Connections

Diagrams illustrating connections for AV sources like VCR, DVD, and Blu-ray Disc players.

HDBaseT Connection Information

HDBaseT Connection Details

Technical information and notes regarding HDBaseT connectivity for image and sound transmission.

HDMI/MHL Connection Notes

HDMI and MHL Connection Notes

Information on HDMI/MHL port compatibility, resolution limits, and potential interruptions.

Connecting the Power Supply

Power Supply Connection

Procedure for connecting the power cord to the projector and power outlet safely.

Remote Control Usage

Power On/Off Operations

Turning the Projector On

Steps to power on the projector and select an initial input signal.

Initial Setup Menu Navigation

Turning the Projector Off

Power Off Procedure

Procedure for safely turning off the projector and its power indicator.

Operating the Projector

Selecting Input Signal

Selecting Input Signal Source

How to choose the desired video input source from the available ports.

Correcting Image Distortion

Keystone Correction

Adjusting the vertical and horizontal keystone distortion for a rectangular image.

Perfect Fit Adjustment

Perfect Fit Distortion Adjustment

Using the Perfect Fit feature to adjust screen corners and sides for distortion correction.

Edge Blending Configuration

Blending Mode and Level

Blending Region Specification

Magnify Function

Magnify Feature Activation

Picture-in-Picture and Picture-by-Picture

PiP/PbP Mode Activation

Using the Menu System

Accessing and Navigating Menus

How to use the MENU and cursor buttons to access and navigate EASY and ADVANCED menus.

EASY MENU Options

Aspect Ratio and Keystone Settings

Perfect Fit and Picture Mode Settings

PICTURE Menu Options

Brightness, Contrast, Color Settings

Tint and Sharpness Settings

IMAGE Menu Options

Aspect Ratio in IMAGE Menu

INPUT Menu Options

Progressive and Video NR Settings

Color Space Selection

SETUP Menu Options

Geometry Correction Options

Accessing Keystone, Perfect Fit, and Warping for image distortion correction.

Edge Blending Configuration

Detailed setup for the edge blending feature for multi-projector displays.

AUDIO Menu Options

Volume and Speaker Control

Audio Source Selection

SCREEN Menu Options

Language and Menu Position

Blank Screen Settings

OPTION Menu Features

Source Skip and Auto Search

My Button Functionality

Assigning and using the My Button for quick access to various projector functions.

Scheduling Projector Operations

SERVICE Menu Options

Altitude Adjustment

Auto Adjust Modes

Communication Settings

Configuring serial communication settings for the control port, including network bridge.

NETWORK Menu Guide

Reference for network operation details and consulting network administrator before connecting.

SECURITY Menu Functions

Accessing Security Menu

Security Password Change

Steps to change the security password, including handling forgotten passwords.

MyScreen Password Protection

Setting up and managing MyScreen password to protect registered images.

PIN Lock Security

Configuring PIN lock for projector access and handling forgotten PIN codes.

My Text Password Protection

Setting up and managing a password for My Text feature to prevent overwriting.

Maintenance Procedures

Replacing the Projector Lamp

Detailed steps for safely replacing the projector lamp unit.

Lamp Safety and Disposal

Lamp Safety Warnings and Disposal

Important safety warnings and guidelines for handling and disposing of used projector lamps.

Air Filter Maintenance

Cleaning the Air Filter

Troubleshooting Common Issues

No Input Signal Troubleshooting

Resolving the 'No Input Signal' message by checking connections and specs.

Input Signal and Temperature Troubleshooting

Input Signal and Temperature Issues

Troubleshooting improper signals, rising internal temperature, and air flow problems.

Indicator Lamp Status Meanings

Indicator Status: Standby, Warming, On

Indicator Lamps for Error Detection

Error Detection via Indicator Lamps

Interpreting indicator lamps for errors like cooling down with detected faults or fan operation issues.

Lamp Errors and Air Filter Warnings

Diagnosing lamp errors and filter replacement needs based on indicator lights.

Security and Overheating Indicators

Understanding indicators for PIN lock activation and potential interior overheating or AC blackout.

Resetting All Projector Settings

Resetting All Settings

Procedure for performing a factory reset of most projector settings to default values.

Troubleshooting Non-Defect Phenomena

Power and Signal Issues

Common issues like no power or no signal that are not machine defects.

Setting Mismatches and Blank Screen

Troubleshooting input mismatches, blank screens, and muted audio.

Audio and Picture Output Troubleshooting

Audio and Picture Output Issues

Resolving issues like no sound, low volume, or no pictures due to settings or external factors.

Appearance and Eco Mode Troubleshooting

Appearance and Eco Mode Issues

Addressing color tone issues, Eco mode operation, and lamp life indicators.

Image Degradation and Connection Troubleshooting

Image Degradation and Connection Issues

Troubleshooting image degradation, excessive video NR, frame lock, and saving function issues.

HDBaseT and Network Connection Troubleshooting

HDBaseT and Network Connection Problems

Resolving HDBaseT connection issues, IR/LAN settings, and compatibility checks.

Hitachi CP-WX5505 User Manual

Table of Contents

Other manuals for Hitachi CP-WX5505

Questions and Answers:

Hitachi CP-WX5505 Specifications

Summary

Projector Part Names

Projector Components Identification

Control Panel Identification

Control Panel Components

Projector Input/Output Ports

Port Identification

Remote Control Identification

Remote Control Components

Projector Installation and Setup

Arrangement Safety Warnings

Arrangement Safety Precautions

Arrangement Environmental Advice

Arrangement Environmental Considerations

Connecting External Devices

Device Connection Diagrams

Connection Diagrams

Network and Wireless Connections

Network and External Device Connections

Wireless Adapter and Network Safety Precautions

Wireless Adapter and Network Safety

AV Source Connections

AV Device Connections

HDBaseT Connection Information

HDBaseT Connection Details

HDMI/MHL Connection Notes

HDMI and MHL Connection Notes

Connecting the Power Supply

Power Supply Connection

Remote Control Usage

Power On/Off Operations

Turning the Projector On

Initial Setup Menu Navigation

Turning the Projector Off

Power Off Procedure

Operating the Projector

Selecting Input Signal

Selecting Input Signal Source

Correcting Image Distortion

Keystone Correction

Perfect Fit Adjustment

Perfect Fit Distortion Adjustment

Edge Blending Configuration

Blending Mode and Level

Blending Region Specification

Magnify Function

Magnify Feature Activation

Picture-in-Picture and Picture-by-Picture

PiP/PbP Mode Activation

Using the Menu System

Accessing and Navigating Menus

EASY MENU Options

Aspect Ratio and Keystone Settings

Perfect Fit and Picture Mode Settings

PICTURE Menu Options

Brightness, Contrast, Color Settings

Tint and Sharpness Settings

IMAGE Menu Options

Aspect Ratio in IMAGE Menu

INPUT Menu Options

Progressive and Video NR Settings

Color Space Selection

SETUP Menu Options

Geometry Correction Options

Edge Blending Configuration

AUDIO Menu Options

Volume and Speaker Control

Audio Source Selection

SCREEN Menu Options

Language and Menu Position

Blank Screen Settings

OPTION Menu Features

Source Skip and Auto Search

My Button Functionality

My Button Functionality