Hitachi CP-X300 - PICTURE Menu

26
PICTURE Menu
PICTURE Menu
Item Description
BRIGHTNESS
Using the ▲/▼ buttons adjusts the brightness.
Light

Dark
CONTRAST
Using the ▲/▼ buttons adjusts the contrast.
Strong

Weak
GAMMA
Using the ▲/▼ buttons switches the gamma mode.
To adjust the "CUSTOM" modes, see "To adjust CUSTOM function
in GAMMA and COLOR TEMP" (

28).
COLOR TEMP
Using the ▲/▼ buttons switches the color temperature mode.
To adjust the "CUSTOM" modes, see "To adjust CUSTOM function
in GAMMA and COLOR TEMP" (

28).
COLOR
Using the ▲/▼ buttons adjusts the strength of whole color.
Strong

Weak
• This item can be selected only for a video signal, s-video or
component video signal.
TINT
Using the ▲/▼ buttons adjusts the tint.
Greenish

Reddish
• This item can be selected only for a video signal, s-video or
component video signal.
From the PICTURE menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press the
► cursor button or ENTER button to execute the item. Then
perform it according to the following table.
(continued on next page)
#1 DEFAULT

#1 CUSTOM

#2 DEFAULT

#2 CUSTOM

#3 DEFAULT

#3 CUSTOM

#5 DEFAULT

#5 CUSTOM

#4 DEFAULT

#4 CUSTOM

#6
DEFAULT

#6 CUSTOM


#2 MID CUSTOM

#3 LOW DEFAULT

#3 LOW CUSTOM

#1 HIGH DEFAULT

#1 HIGH CUSTOM

#2 MID DEFAULT

#6 Hi-BRIGHT-3 CUSTOM

#6 Hi-BRIGHT-3 DEFAULT

#5 Hi-BRIGHT-2 CUSTOM

#5 Hi-BRIGHT-2 DEFAULT

#4 Hi-BRIGHT-1 CUSTOM

#4 Hi-BRIGHT-1 DEFAULT