Hitachi CP-X3020 - Page 84

7
To input component video signal to COMPUTER IN ports
ex.
Y CB/PB C R/PR
COMPONENT VIDEO OUT
Connection to the ports (continued)
To input component video signal to the COMPUTER IN1 or IN2 port of the
projector, use a RCA to D-sub cable or adapter.
For about the pin description of the required cable or adapter, refer to the
descriptions about COMPUTER IN1 and IN2 port (
3).
RCA plugs
D-sub plug
VCR/DVD/Blu-ray
Disc player
RCA connectors