Hitachi CS 33EDTP User Manual

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this
manual BEFORE operating the power tool. Please keep this manual available for other users and owners
before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de
sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit. Prière de
lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce mode d’emploi à la
disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi
doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede provocar lesiones
graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
Model
Modèle
Modelo
CS 33EDT / CS 33EDTP
Chain Saw
Tronçonneuse
Motosierra
CS33EDTP
000BookCS33EDTUS.indb1000BookCS33EDTUS.indb1 2011/04/2811:32:422011/04/2811:32:42

Hitachi CS 33EDTP Specifications

General

Engine Type	2-stroke
Displacement	32.2 cc
Weight	8.4 lbs
Chain Gauge	1.3 mm
Chain Pitch	3/8 inch
Bar Length	35 cm

Summary

Meanings of Symbols

What is What?

Warnings and Safety Instructions

Operator Safety

Covers essential safety precautions for the user, including protective gear and personal well-being.

Unit, Machine, Fuel, and Cutting Safety

Details safety checks for the unit, machine, fuel handling, and cutting operations.

Transport, Storage, and Maintenance Safety

Specifies guidelines for safely transporting, storing, and maintaining the chain saw.

Specifications

Assembly Procedures

Operating Procedures

Fueling and Chain Oil Procedures

Instructions on safely refueling and managing the chain oil system.

Starting Procedures (Cold and Warm Engines)

Detailed steps for starting the engine, covering both cold and warm engine conditions.

Chain Lubrication Test

Method to verify that the chain oil is being properly discharged during operation.

Stopping the Engine

Instructions on how to safely shut down the engine.

Basic Techniques for Wood Cutting

Chain Catcher and Felling Techniques

Information on the chain catcher and fundamental principles for safely felling trees.

Limbing and Cross Cutting Techniques

Guidance on safely removing branches and cutting logs into manageable lengths.

Specific Cutting Scenarios

Details methods for thick logs, stuck saws, and general cross-cutting.

Filing Cutter Instructions

General guidance and steps for properly filing the saw chain cutters.

Saw Chain Sharpening Angles

Specifies the correct angles for filing chain cutters to maintain optimal performance.

Maintenance

Carburetor and Idle Speed Adjustment

Instructions for adjusting the carburetor and setting the correct idle speed.

Air Filter Service

Procedures for inspecting, cleaning, and replacing the air filter.

Spark Plug and Oiler Port Maintenance

Guidance on checking, cleaning, and maintaining the spark plug and oiler port.

Guide Bar and Side Case Maintenance

Steps for cleaning and maintaining the guide bar and side case.

Fuel and Chain Oil Filter Service

Instructions for cleaning or replacing the fuel and chain oil filters.

Cylinder Fins and Muffler Cleaning

Guidance on cleaning cylinder fins and muffler for optimal engine performance.

Chain Sharpening

Cutter Components and Depth Gauges

Identifies cutter parts and explains how to adjust depth gauges.

Filing Cutter Instructions and Angles

Provides guidance on filing cutters and the correct sharpening angles.