ON/OFF
Å
·UI¹ô«ØqOGA²« ÕU²H
·UI¹«Ë qOGAð r²¹
ON/OFF
WOzUÐdNJ« WMJ*« „d×
WOzUÐdNJ« WUD« ÕU²H dOOGð WDÝ«uÐ
Å
Æ
02/CV-S950_02-11(CS) 15/10/03, 5:44 PM5
RUG AND FLOOR TOOL
Fig. 6A Rug and floor tool
The tool is fitted with a brush at the back which can either be used in the “withdrawn” or “projected”
position. These positions are operated by the pedal on the tool marked “ ” (Carpet)
and “ ” (Floor) For cleaning rug or carpet, keep the brush in its “withdrawn” position,
i.e., with the pedal marked “ ” pressed down with your toe.
If you feel the tool is heavy to slide on the carpet, please reduce the suction power by adjusting
the suction control. (Fig. 9)
12 A
11A