31
CP-A100 / ED-A100 / ED-A110 (A1DN)
6-7 Caring for the mirror and lens
If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration of display quality. 
Please take care of the mirror and lens, being cautious of handling. 
COMP
UTE
R OUT
COMP
UTE
R IN2
COMP
UTE
R IN
1
CONT
ROL
LAN
AUD
IO
OUT
S-
VI
DEO
Y  
 
   C
B
/P
B  
 
 C
R
/P
R
VID
EO 
 
     L
 
 
 
 
    R
USB
AUD
IO IN3
AUD
IO 
IN
1
2
COMP
UTE
R O
UT
COMP
UTE
R IN2
COMP
UTE
R IN
1
CONT
ROL
LAN
AU
D
IO
OUT
S-VI
DEO
Y  
 
 
 
  C
B
/P
B
 
 
 C
R
/P
R
VID
EO 
 
 
L
 
 
 
 
R
USB
AUD
IO 
IN3
AU
D
IO IN
1
2
Cleaning cloth
Blower
1.  Turn the projector off and unplug the power cord from the power 
outlet. And cool the projector down by leaving it for a while as it is.
2. The lens door can be opened manually.
Please hold both side of the lens door and slowly open it until it is 
locked with clicking sound.
3.  Wipe softly the mirror and lens with a cleaning cloth for lens on the 
market, being careful not to give any damage on the mirror and lens. 
For around edge of the mirror and lens where might be diffi cult to be 
wiped out, please use an air blower for cameras on the market to 
clean up.
4.  To close the lens door properly, please take the following procedure.
   (1) Plug in the projector.
   (2) Turn on the power switch.
  Even though the lens door starts to close, it might not be   closed 
properly.
   (3)  Press the STANDBY/ON button, so that the lamp starts to light up.
   (4)  After the POWER indicator turns to steady green, press the 
STANDBY/ON button twice to turn off the projector.
        The lens door will close properly.
NOTE 
• 
When the lens door is closed manually, it may not shut properly.
WARNING ►Before caring for the projection mirror and lens, turn the projector off and unplug the 
power cord, then cool the projector suffi ciently.
►Do not use a vacuum cleaner to clean the projection mirror or lens, since it might give some damage.
►Do not use cleaners or chemicals other than those specifi ed in this manual. Especially the mirror has to 
be paid special attention, since these materials might give serious damage on the mirror.
CAUTION ►Be careful not to pinch your fi nger with the lens door, to prevent an injury.