EH-TP500 Series
Operating Instructions
VER 1.00
2.
Standards and Approvals
The products have been designed for use in an industrial environment in compliance with the 2014/30/
EU EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4 EN 55011 Class A
EN 61000-6-2 EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
The installation of these devices into the residential, commercial and light-industrial environments is
allowed only in the case that special in measures are taken in order to ensure conformity to EN 61000-6-
3.
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS) Directive
2002/95/EC
In compliance with the above regulations the products are CE marked.
Product Identification
The product may be identified through a plate attached to the rear cover. You will have to know the type
of unit you are using for correct usage of the information contained in the guide.
An example of this plate is shown in the figure below:
EH-TP504
product model name
ETOP504H4P1
product part number
04/15
month/year of production
S.N. 00000000000
serial number
XXXXXXXXXXXXXXX
version id of the product
To Next Page
